|
Additional Examples
Chapter 3
Example CD3-1: Solution of space
conditioning processes including supply and return fans and duct heat loss/gain.
Example CD3-1 pdf
Example CD3-2: Solution of space
conditioning processes with reheat at low space SHF.
Example CD3-2 pdf
Example CD3-3: Solution of the
mixing process for a multi-zone air handler operating at partial load.
Example CD3-3 pdf
Example CD3-4: Solution of a
dual-duct system mixing problem at low space SHF.
Example CD3-4 pdf
Example CD3-5: Psychrometric
Calculations for space heating with outdoor air and adiabatic humidification.
Example CD3-5 pdf
Chapter 5
Example CD5-1: Estimating a
U-factor for a frame, brick veneer wall.
Example CD5-1 pdf
Chapter 10
Example CD10-1: Design of a
Primary-Secondary-Tertiary, variable volume chilled water system.
Example CD10-1 pdf
Example CD10-2: Typical standard
details for centrifugal pumps, coils, and compression tanks as might be shown on
working drawings.
Example CD10-2 pdf
Chapter 11
Example CD11-1: Design of an air
jet and hood to remove vapor contaimanant from a work station
Example CD11-1 pdf
Chapter 12
Example CD12-1: Design of a supply
and return duct system using the DUCT program.
Example CD12-1 pdf
Example CD12-2: Analysis to correct
a faulty supply duct system.
Example CD12-2 pdf
|
